RC4 Transponder

The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.

Our RC transponders help you to track lap times and give better insights in your performance.

You install the transponder in your RC car. If you race with multiple RC cars it’s convenient to install a transponder in every car. A transponder has a seven-digit number.

Features:

All your results in your personal profile.

RC4 transponders can be used for both indoor and outdoor racing and will perform on just about any surface.

Compatible with MYLAPS RC4 timing systems.

Specifications

- Operating voltage : 3.0 - 16 VDC

- Wire insulation : Aerospace/MIL-spec high-temp PTFE (Gasoline/Nitro resistant)

- Max speed : 120 km/h (75 mph)

- Weight incl. holder : 4.7 g

- Humidity : Max. 90% relative

- Temperature range : 0 - 50 °C (32 - 122 °F)

- Dimensions : 16x19x6mm (063x0.75x 0.24 inch)

- Signal transfer : Magnetic induction 

- Works with : RC4 Timing System only!

- Quick change holder : Yes

- Power : Feed from free receiver channel (ch3 or batt)

- Compatible with : MYLAPS Speedhive app

- Power consumption : 14mA @ 6 VDC

- Code resolution : 1.5 ms