이미지 확대/축소가 가능합니다.

닫기


Serpent SRX8-E ARR 1/8 4wd EP (SER600022)

Serpent now offers the SRX8e-Buggy also in a Ready To Race, to make this superb car even more attractive to a broader customer base, so also Hobby racers can now join in for the action. 

Top-quality components packed in a Ready-to-race package, the best start a Hobby-driver can make. 

High end racing chassis with top quality parts, impressive 2.4 GHz transmitter, Waterproof electronic speed controller with small footprint, which fits the E-buggy holder like a glove combined with a strong 1900KV brushless motor with lots of torque.



다운로드

09-06-21Ref guide SRX8e RTR21 KBDownload
09-01-21Picture file SRX8e RTR12 MBDownload
08-25-21Manual DragonRC DS8 - 120A - WP4 MBDownload
08-24-21Ref guide SRX8e RTR6 MBDownload
08-23-21Manual DragonRC radio DTS3373 KBDownload

셋업시트

06-16-21SRX8e RTR - Editable setupsheet1 MBDownload
06-16-21SRX8e RTR - Blanck setupsheet1 MBDownload


상세설명


Main features:

- race ready high performance electric 1/8 4wd buggy

- expert pre-assembled and pre-set

- 4wd with Cardan shafts, 3 compact ,durable HTD geardiffs, super-easy machined aluminium motor  mount, superlow longtudinal battery boxes, compact speedo-servo mount, unique angled steering     system, 16mm big bore shocks, anti-roll bars FR and RR, 6061-T6 alu shocktower FR and RR, durable suspension and transmission parts, captured suspension pins, the works !!

- Dragon-RC pistol type transmitter 2.4 GHz

- Dragon-RC 120A waterproof speed controller

- Dragon-RC power full 1900kv brushless sensorless motor

- Dragon-RC 15kg strong servo with metal gears

- Dragon-RC high grip premounted racetyres and wheels

- Pre-painted and precut bodyshell and large nylon rear aero-wing

- Full color user manual and decal set included




Features:  

Transmitter and receiver

The DragonRC pistol type transmitter

The small and light receiver is fitted inside the radiobox of the car.

 



Speed-controller

The electronic speed controller is a fully Waterproof 120A from DragonRC with a small footprint which fits the SRX8e RTR like a glove. The new modern design is very small and attractive looking. Top-quality soft silicone covered cables. 



Brushless motor

The DragonRC brushless sensorless motor is a strong 1900kv unit which gives lots of torque and amazing top speed. , and is anodized in same bronze color as the other alu parts of the car. 



Chassis 

Chassis plate in  3mm  6061-T6 aluminium. Kick-up angle on front  for stabile landings.  Countersunk holes.   Slots to locate the  front and rear suspension mounts precisely.  Angled sides to increase stiffness. 

            


Bumper             

Aligned with chassis  kick-up for precise landings and to protect front suspension holder and anti-roll bar. 



Chassis stiffners 

Composite  stiffner front and rear, to give extra stiffness, but still allow some flex as needed.



Central radio / servo mount 

Composite compact radiobox which offers good space for the  steering servo and the receiver. 



Battery-cases / side-guards

The main eyecatchers are the extremely low laydown longtudinal placed battery-packs at each side of the car, being part of the side-guards, securely fastened with a Velcro strap, for easy and fast battery changes. 

The weight low in the car and in the right position, well balanced. The Lipo holders comply with ROAR legal packs/dimensions.



Motor mount:

The motor is placed in the most optimal position in the car, keeping motor-forces and transmission parts/alignment in mind.  

Only one-screw  is needed to secure  the BL motor, in the nicely designed durable machined aluminum motor mount. 

Space for additional motor-cooling available as needed.


The space for the motor allows a maximum motor-length of 70mm, which covers most widely used motors ( except for the truggy/monster truck motors).



Steering blocks assembly

Composite steering blocks combined with 10 degr C-hubs  for precise steering.  

Spring steel wheel-axles with large size bearings and larger inner with precision threaded aluminum wheel-hubs with offset . 

Flanged and serrated wheel nuts to guarantee that you will not loose a wheel nut in a race.



Front suspension

Durable oversized  lower suspension arms in strong composite nylon. 

On the lower side the downstops screws are mounted. 

The lower shock-mounting pins are secured with a small grubscrew from the bottom.


Front and rear anti-roll bar

The front anti-roll bar system, consist of a spring steel bend wire, which is guided through the diff-cases and runs in steel adaptors.  

The wire is linked to the lower suspension arm, with a captured adjustable threaded pivot ball, for very precise and low friction  operation and easy tuning.



Shocktower and bodymounts front 

4mm thick 6061T6 aluminium anodized shocktower with 3 upper positioning holes for the shocks and 4 holes for roll-center positions.  

1 centrally located bodymount.



Angled steering system / servo saver           

The bell cranks are angled to reduce the angle of difference between the total caster and steering plane. 

Therefore you will have less bump steer and a truer steering Ackerman through the entire range of suspension    

 

Rear suspension arms      

Durable longer oversized  lower suspension arms in strong composite nylon. On the lower side the downstops screws are mounted. 

The lower shock-mounting pins are secured with a small grubscrew from the bottom. 



Mud-guards

Optional are the composite mud guards, which can mount to the lower suspension arms, and will keep dirt away from your anti-roll bars transmission and wheels.

            

Rear  uprights  assembly

Composite uprights with 3 upper roll-center positions. Strong steel track-rods with L/R threading and strong balljoints  to pre-set camber.  

Hard steel wheel-axles with large size bearings and larger inner   ones  with precision threaded aluminum wheel-hubs with offset. 

Flanged and serrated wheel nuts to guarantee that you will not loose a wheel nut in a race.           



Shocktower rear

4mm thick 6061-T6 aluminium shocktower, integrated into the rear section for extra stiffness, with 4 upper positioning holes for the shocks and 4 holes for roll-center positions. 



Wing mount and bodymounts rear  

Composite rear straight MD wing, with a strong nylon mount, with angle adjustment. Central rear bodymount.  



Shock absorbers RCM big-bore 16mm         

Anodized aluminium shock bodies with durable 4mm shock-rods.

Adjustable nut to set the ride height setting. 

Shocks use large diameter membranes and large diameter O-rings and bushings to create a supersmooth and leak-proof package. 

Large diameter pistons are held in place by a nut on the polished shock-rods tops. 

Open type spring retainer to let dirt out easy. 


Color-coded progressive shock springs are supplied for the 1st standard set-up and all springs are grinded flat top and bottom, and checked individually for tension and length and are matched. 



Compact gear differentials

Large Volume Differentials and oversized gears.
One of those must haves are high volume large internal gear diffs. 

We manned up here, and went back to the drawing board and completely re-tooled our differential approach. 

The internal gears are a staggering Mod 1.25 which puts them at the largest in the market place. 

Hardened spring-steel diff-coupler 13T with connector running in 2 oversized bearings  The Cobra-E uses a 13T / 44T combo Gearing and a 44T central spur gear. 

This drive ratio will provide amazing acceleration combined with the low vehicle weight. 


Front and rear drive          

The front has captured driveshafts using a CVD system. 

The rear has durable brown S2 steel driveshafts with hard steel pins.



Brown S2 steel transmission parts  

The front and rear strong hard black steel cardan shafts connect the differentials . 

            

Body

Serpent superlow Cobra E buggy body, fully pre-painted in a very attractive design and pre-cut too.  

The very low body has excellent handling, also supreme in jumps.


Rear wing,  the straight MD rear wing is included for great downforce and straight line stability.



Tyres / wheels

The Cobra is fitted with premounted DragonRC buggy racing tyres. 

The tyres are glued on durable but flexible DragonRC race-wheels with molded cell-foam inserts.  

A super-package for excellent grip on the most common surfaces. 


Oils and grease   

Top-quality silicone shock-oil, silicone diff oil and some grease is used to meet the standard set-up.

            

Manual and set-up            

Full color user manual with easy to follow steps, exploded views for easy spares ordering. 

A separate manual for the transmitter and the speed controller is included.

 

Decals  

Black and white promo body-decals ; Serpent generic and SRX8e ones.             

            

Packing

The RTR kit is packed in a color full large strong packing box with protection for car and transmitter.             

Service and Support        

The Serpent distributor, dealer or agent is your source for more info, but also the Serpent website and  Facebook groups.              

            

Needed to complete the car:           

-  4 x AA batteries for the transmitter

-  2 x Lipo hard-packs  3800 mA or more

-   (charging equipment/ power supply)